Overview & Features
Dome Lens Unit IIIA
Extraordinary compact optional dome specifically designed to use with UWL-95 C24 & UWL-95S XD wide conversion lens delivering underwater view angle approx. 141° when using with 1.0-type large sensor camera.
The Dome Lens Unit IIIA uses high transparency optical acrylic lens offering lightweight and competitive price.
Features
Both Dome Lens Unit IIIA/Dome Lens Unit IIIG have optical multicoated dome element which effectively suppresses flare/ghost even shooting in bright and clear water delivering sharp image with stable contrast. Installing this super wide option on the UWL-95 C24 increases underwater view angle up to approx. 141° and stretches focus range having minimum focusing distance of 0cm to get subject on the lens surface in focus. Superior ultra-wide dome lens suitable to use for wide variety of shooting conditions not only shooting wide seascape but wide macro imaging as well.
The Dome Lens Unit IIIA and the Dome Lens Unit IIIG use same lens barrel making it possible to install other dome material when necessary (like when replacing damaged original dome material).
The Dome Lens Unit IIIA/G has to be used with the UWL-95 C24 series lens underwater and not usable as standalone.
Technical Specifications
[Dome Lens Unit IIIA]
Outer diameter |
φ124.8 mm/4.9 in |
Length |
47.8 mm/1.9 in |
Weight [air] |
approx. 272 g/9.6 oz |
Compatible lens |
INON UWL-95 C24 series |
Depth rating |
60 m/196.9 ft |
Material |
Corrosion-resistant aluminum alloy, PC etc. |
Surface finishing |
Rigid black alumite |
Glass/Coating |
Optical acrylic/anti-reflection coating (inner surface) |
Max. view angle [underwater] (*3) |
Approx. 141° |
[Dome Lens Unit IIIG]
Outer diameter |
φ124.8 mm/4.9 in |
Length |
47.8 mm/1.9 in |
Weight [air] |
Approx.372 g/13.1oz |
Compatible lens |
INON UWL-95 C24 series |
Depth rating |
60 m/196.9 ft |
Material |
Corrosion-resistant aluminum alloy, PC etc. |
Surface finishing |
Rigid black alumite |
Glass/Coating |
Optical glass/anti-reflection coating (inner surface) |
Max. view angle underwater (*3) |
Approx. 141° |
Warranty
Inon provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for 1 year from the date of purchase, with the following exceptions:
-
This warranty does not cover commercial or rental use.
-
Should your equipment prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at Inon´s discretion, free of charge, excluding shipping and
handling charges.
-
Repairs made under this warranty will not extend the warranty period
-
This warranty is non-transferable and applies to the original purchaser only.
-
All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
-
Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
-
Inon nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
-
Inon accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
-
All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
-
Inon does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
-
This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
-
This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions
resulting from misuse and negligence.
-
This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
-
Modifications or repair by anyone other than an
authorized Inon Dealer or ADITECH Service Department will void
the warranty.
-
By purchasing this product you agree
and understand that in no event will Inon, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if Inon or ADITECH is advised of such damages.