Overview & Features
Isota housing 5D Mark III
An easy to use, highly professional product has been created through
techniques and innovations gained from years of experience. The perfect
handling of the Canon EOS 5D Mark III housing is possible by means of
adjustable handles crafted to match the human hand and make holding the
camera very comfortable even throughout long dives.
Easy access to all
key/main camera controls by means of clearly labelled laser-engraved
longlasting buttons, even with gloves and drysuit gloves. An easy and
quick release camera mounting plate allows the camera positioning and a
lever locks the tray inside the housing. The back door has a large
window anti-scratch glass for a fine camera display and optical
viewfinder view and it is entirely detached from the front body to make
easier the camera fitting. External viewfinders can be mounted, INON X-2
compatible.
ONE HAND OPEN/CLOSE
The housing for Canon EOS 5D
Mark III is closed with Isotta’s single handed one-turn knob. It’s the
only single latch closing mechanism in the DSLR housing market. It’s
fast, simple and secure thanks to its double steel pins at the bottom on
the housing.
PORTS AND EXTENSION RING
A series of ports and
extension rings are available in dedicated section. The removable port
is fitted thanks to markers and a bayonet 120 mm connection to the Canon
EOS 5D Mark III. The interchangeable port bodies and extensions rings
combine to allow the use of most of lenses on the market for maximum
versatility and performance.
LIGHTING
The housing for Canon EOS 5D Mark III offers the possibility to use external strobes via two standard optical
light ports as well as two Nikonos sync cord bulkheads. This allows for
easy mounting of any strobe and lighting set up in manual mode.
CONSTRUCTION AND SAFETY
Only the best materials
are used to manufacture our housings such anodized aluminum, which is
anticorodal and thermo-coated, and stainless steel. A longlasting
product that requires easy and simple maintenance by the user. Dual
high-quality O-Ring seals protect and ensure a perfect and secure
watertight for all movable and removable parts; a red alarm for
humidity/water inside the housing is powered by a battery replaceable by
the user. Working depth 100 metres. Different accessories can be fitted
by means of M8 hole positioned on upper side of the housing and double
threaded M6 holes located on housing bottom side.
Technical Specifications
- Depth rating: 300 feet/90 meters (upgradeable on request to 425ft/130 meters)
- Precision machined from a single aluminum
block. Fully anodized
- All function labels are pad printed to prevent peeling off or fading.
- Accurate ergonomic design and excellent
underwater balance - all controls including the video activating
controls are within easy reach.
- Optional Synchro socket: 1x or 2x Nikon 5-pin or S6 Subtronic type
- Optional flash trigger, manual (non-TTL)
- 2 optical sync socket are built-in
- Finishing: Anodized coating after barrel sanding.
- Camera installation: Saddle-way.
- Handles: two ergonomic hand grips
- Construction:
- Housing body: Anodized aluminum alloy
- Display window: Abrasion resistant polycarbonate
- Grip handles: Polycarbonate and rubber
- Dimensions:
- Width: 230 mm
- Height: 210 mm
- Thickness: 140 mm
- Weight: Approx. 2.9 kg (without camera)
- Depth rating: 100 metres
What´s Included
- Isotta 5DMKIII housing without port
- Grips, (left and right hand)
- Spare main O-ring
- Container of O-ring lubricant
- Owner manual
Warranty
ISOTTA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for
2 years from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- ISOTTA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- ISOTTA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ISOTTA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ISOTTA or ADITECH is advised of such damages.