Customer Support
+34 972 661 661
Price (inc. VAT)
€699.00
€804.00
Offer
-13%
Price (inc. VAT)
€452.00
€574.00
Offer
-21%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€49.00
€69.00
Offer
-29%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%

Mangrove Fotosystem FS-YSD3-IK-MIL

Manufacturer: Aditech
Availability: Usually ships in 2-3 business days
Share
Digital Strobe package for compact and mirrorless Ikelite housings, it comes with a universal tray Ikelite 9523.61 with single handle and 25mm ball mount, 2 clamps C-BJ, rigid arm BJA200N, Sea&Sea YS-D3 strobe and the optic sync cord.

Price (exc. VAT) €916.53

Price (inc. VAT) €1,109.00

Shipping cost from €50.00
Calculate shipping cost

Add to Cart

Fotosystem FS-YSD3-IK-MIL

Digital Lighting package, it comes with a universal tray Ikelite 2605.04 with single handle and 25mm ball mount, 2 clamps C-BJ, rigid arm BJA200N, Sea&Sea YS-D3 strobe and the optic sync cord.
Creating a broad evenly distributed light intensity and a wide beam angle for the ultimate underwater image.

FEATURES

High Performance Strobe

Newly designed circuitry and light-emitting unit produces powerful guide number of 33. In addition, a high precision aspherical optical toroidal lens has been fitted over the two flash tubes to disperse an even light from the center to the edge. The strobe`s beam angle will increase to 110° by attaching the standard accessory diffuser. When the optional dome diffuser is attached, beam angle will increase to as wide as 150°.
In order to avoid misunderstanding, the YS-D3 guide number (GN) and the beam angle are based on measurements taken on land (not underwater).
Some competitors will often state a GN measured on land and the beam angle in water, for example a GN 33 and beam angle of 110 degrees. However, this GN 33 value is based on a beam angle of 60~70 degrees. The beam angle may be expanded in water by a dome effect, however the GN in water is significantly lower than the value measured on land.

Note: A land-based strobe that uses the same four AA batteries as the YS-D3 may provide a notation that the GN is 60, but these measurements are taken under the condition that the focal length is equivalent to 200 mm (= beam angle 12°). When the beam angle becomes narrower, the brightness of the illuminated area increases due to the light-collecting effect.

Superior consecutive firing capability to capture those critical moments.

The YS-D3 utilizes larger capacity condensers compared with those used on competing strobes. In addition, the D3 is also equipped with a newly designed charging circuit. As a result, the YS-D3 will fire at GN16 continuously without any interval time. Even when the strobe is fired at GN22, the strobe will fire again within a mere 0.8 seconds.
When the YS-D3 is fired at Guide Number over 22, a two-stage ready-to-fire signals will be issued. For instance, after the strobe fires at full power of GN33, the strobe will inform you both visually and audibly when the condenser is charged to fire at GN22. Then, when the condenser is charged enough to fire at GN33, another different signal will be issued. This design allows you to release more shots in scenes where you want to shoot as many pictures as possible, maximizing shooting intervals between scenes

Target light with increased power

Target light incorporating a uniquely designed aluminum heat diffuser, the target light is now powerful enough to be used as a dive light, about 4 times brighter than YS-D2

Various accessories available for all underwater imaging experiences

Dome diffuser (optional accessory): The optional dome diffuser increases beam angle to 150 degrees. Essential accessory when fisheye lens is used, or soft light is required.

Snoot (optional accessory): The optional Snoot is a strobe adaptor which narrows the beam angle to be directed at a target point. Diameter of the opening 25mm. Designed with internal prism which aligns target light`s light axis and strobe`s light axis to the center.

Slave prism (optional accessory): Optical guiding device to fire the strobe when a fiber-optic cable is not used. This device is for manual use only. The device is effective if multiple strobes are used in a fixed position. However, the flash may not fire depending on the position of where multiple flashes are occurring in relation to that of the master flash.

Excellent visibility

Backlight panel that is effective when shooting in dark environments. The indicator color on the back of the YS-D3 changes each time the position of the mode switch is changed. Blue (in DS-TTLII mode), light blue (in slave TTL mode), orange (in manual mode with pre-flash), and green (in manual mode without pre-flash) The positioning of the operation system is obvious during night diving.
* The color in DS-TTLII mode has been changed from the YS-D2 to match the color with the optical converter.

Connection method with arm that can be selected according to preference

The YS-D3 strobe comes with a straight type ball base. Optional YS base and new diagonal ball base can be installed depending on the application.

YS base (common to YS-D1 / D2 / D3): traditional YS base, easy vertical swing.

Diagonal ball base (only for YS-D3): a ball base inclined at 35° compared to the straight type. This makes it easier to lower the strobe backwards, making it suitable for shooting when using a dome port. Also, when a Synchro Cord N is installed, interference between the cord and the ball clamp is minimized.
  • Guide Number (ISO 100/m) (land): 33, 28 (with Diffuser attached)
  • Beam Angle: 105°x80° (without Diffuser), 110°x100° (with Diffuser)
  • Batteries: 4xAA A: 6V Ni-MH: 4.8V
  • Number of Flashes *1: Alkaline 140 / Ni-MH: 220
  • Recycle time (full) *2: A: 3.5 sec. Ni-MH: 1.7 sec.
  • Color temperature: 5800K
  • Color temperature w/diffuser: 5500K
  • Depth rating: 100m / 330ft
  • Dimensions (WxHxD)]: 92x111x147mm / 3.6 x 4.4 x 5.8 inches (excluding ball base)
  • Weight: 610g / 21.5oz (w/o batteries) (excluding YS-base)
  • Underwater weight: Approx.+40g / 1.4oz (incl. batteries)
  • Exposure control: DS-TTL II, Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 33 (11 steps)

Other Features

  • DS-TTL II function
  • Slave function
  • Auto power OFF function 30min
  • Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable
  • Over-pressure relief valve
  • LED target light (output is adjustable in 2 steps)
  • Audible charge signal
*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2500 mAh batteries.
  • 1x Sea&Sea YS-D3 Strobe head
  • 1x Ball mount (to mount to 1 inch Ball joint type arm)
  • 1x Diffuser 110 degree
  • 1x Silicone Grease
  • 1x Card with QR code to download the user´s manual
  • 1x Universal tray Ikelite 9523.61
  • 1x Adapter for rigid arm A-BJ-IK to handle
  • 1x Rigid arm BJA200N
  • 2x Clamp C-BJ
  • 1x Optical sync cord
Sea&Sea provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Sea&Sea´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Sea&Sea nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • Sea&Sea accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Sea&Sea does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Sea&Sea Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will Sea&Sea, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Sea&Sea or ADITECH is advised of such damages.

Do you have any doubts?