Overview & Features
Digital Sine Wave Inverter DSW-1200/12V
The high-quality digital sinusoidal
AC inverter IVT DSW-1200, 12 V, 1200 W, reliably and accurately converts
12 V direct current into a real 230 V sinusoidal alternating current of
230 V/50 Hz. This enables a connection
to different 230 VAC devices from voltage source such as boat and car
devices, solar panels on the weekend house or when camping.
The
power start function and the high peak output power of 1200 W facilitate
the smooth operation of critical devices with high start-up current
such as e.g. compressors or pumps. Comprehensive safety features such as
galvanic isolation, and protection against short-circuits, polarity
reversal, overload, over-voltage, over-heating and dynamic deep
discharge protection allow a professional use.
Key Features
- Input voltage: 12 V or 24 V DC
- Double as high peak output power
- Particularly safe: galvanic isolation of the input and output stages
- Energy-saving standby function
- Dynamic deep discharge protection
- Power start function
- 5 V USB terminal
- Temperature range -25 °C to +60 °C
- Sturdy metal housing
- Output voltage: true sine wave alternating voltage 230 V/50 Hz
- Extensive power range: continuous output power from 300 W to 4000 W
True Sine Wave Alternating Voltage.
Digital Sine Wave Inverters of the DSW series offer an
independent energy supply wherever it is needed: on the go or
stationary, as single unit or in combination with alternative energy
sources such as solar or wind power. As they convert reliably and
precisely an input voltage of 12 V respectively 24 V into a true sine
wave alternating voltage of 230 V/50 Hz. Even sensitive electrical
consumers such as measuring devices, pumps or machines with electronic
regulation, TV sets, monitors and many others can be supplied safely
with power independently from the public mains net.
Our inverters
offer a power spectrum between 300-2000 W continuous power and
respectively a double as high peak output power. Should this not be
sufficient, you have the possibility to switch 2 DSW-2000-Synchron
devices in parallel.
Thus, a continuous power of 4000 W is achieved.
The
inverters of the DSW series and the solar controllers of the MPPTplus⁺
series are perfectly attuned to each other. With only one remote control
(cable-connected version FB-04 or radio-controlled version FB-05) as
well as with the Webbox-LCD the devices can be controlled and monitored
individually.
Further features:
- Standardly equipped with overvoltage shut-off, overload management, short circuit shut-off and protective overheating switch
- Energy-saving standby function
- Dynamic deep discharge protection
- Power start function for electrical consumers with high inrush current
- Suitable for permanent mounting inside commercial vehicles thanks to the E-mark certification
- Monitoring and controlling of the DSW inverters and of the
- MPPTplus⁺ solar controllers with only one remote control (FB-04/FB-05) or from everywhere via PC by virtue of the Webbox-LCD
- 5 V USB terminal
- Temperature range -25 °C to +60 °C
- Sturdy metal housing
Technical Specifications
INPUT
- DC rated voltage: 12 V
- DC voltage range: DC 11–15 V
- Max. input current: 124 A
- Adjustable deep discharge protection: 9,0–11,5 V
- Pre warning deep discharge protection: 1.0 V above shutdown
- Deep discharge protection factory setting: 10.5 V in neutral, 9.5 V with nominal load
- Restart voltage: 12,5 V
- Shutdown, overvoltage: 16 V
- Input power, neutral: 4 VA
- Input power, standby: 0,4 VA
OUTPUT
- Output voltage: 230 VAC ±2%
- Frequency: 50 Hz ±1%
- Continuous output current: 5,2 Aeff
- Continuous output power rating (cos φ > 0.8): 600 VA
- Peak output power rating (cos φ > 0.8): max. 2sec 1200 VA
- Efficiency: typ. 90%
- Standby level: Output current < 0.1 A
GENERAL
- 230 VAC output: 1x push socket
- USB output, type A socket: 5 V DC/500 mA
- Permissible temperature range, nominal output: -25 °C to +60 °C at 66%, -25 °C to +40 °C at 100%
- Dimensions LxWxH: 391 x 234 x 88 mm
- Weight: 3.5 kg
What´s Included
- Inverter DSW-1200/12V
- User manual.