Overview & Features
Mangrove Explorer EX-FHD
Sumersible CCTV camera Mangrove Explorer EX-FHD, 2 Megapixel Full HD 1080P AHD/CVI/TVI and 1000TVL CVBS, specially designed for underwater monitoring and inspection applications, it can also be used as a diver mounted video camera. The Explorer underwater video camera is a compact, high resolution, full colour camera with integral low voltage lighting. Built to survive in the harsh underwater inspection environment, Mangrove CCTV cameras have been designed to be compact and rugged while at the same time provide a high quality colour picture.
Applications
-
Internal inspection of pipes
-
Tank and well inspections
-
Confined space inspections
-
Drop Camera
-
Underwater surveillance
-
Wet weather surveillance
-
ROVs
-
Pre-dive inspections
-
Operator visuals for monitoring equipment and machinery
Key Features
-
1/2.8" SONY IMX 322 CMOS 2M pixels
-
Full HD 1080P
-
AHD/CVI/TVI and CVBS output
-
3.6 /F2.0 lens
-
0 Lux Min Illumination with IR LED On
-
NTSC or PAL mode
-
Low Power Consumption
-
Depht rated to 200m / 660 feet
Technical Specifications
- Image Sensor: 1/2.8" SONY IMX 322 CMOS 2M pixels
- CVBS Resolution: PAL 960(H)x576(V) / NTSC 960(H)x480(V)
- AHD/CVI/TVI Resolution: 1080P @30fps
- Lens: 3.6 mm/F2.0
- FOV (under water): 51º
- Scanning Mode: PAL or NTSC
- OSD: Built-in/Support UTC OSD
- Electronic Shutter: Auto, 1/25~1/50000
- AGC: 1~15
- D-WDR: OFF/ON/AUTO
- Defog: OFF/AUTO
- White Balance: ATW/AWC-SET/INDOOR/OUTDOOR/MANUAL/AWB
- Day & Night: AUTO/COLOR/ B/W / EXT
- Mirror function: OFF/MIRROR/V-FLIP/ROTATE
- Motion detection: OFF/ON (4 areas)
- Image adjustment: SHARPNESS/MONITOR/LCD/VIDEO OUT
- CVBS output: 1 BNC 1Vp-p (75 Ohm)
- OSD menu: 12 languages
- Minimum Illumination: 0 Lux IR LED ON
- Power supply: 12 Vdc +/- 10% - 40 mA (IR off), 200 mA (IR on)
- Operating temperature: -10 to +50ºC
- Depth rating: 200 m / 660 feet.
- Weight: 458g
- Dimensions: (D) 60 mm x (L) 100 mm
What´s in the box
- UW CCTV camera Explorer EX-FHD (without video cable)
- Bracket BK-60-T1
Warranty
ADITECH provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for
2 years from the date of purchase, with the following exceptions and conditions:
- This warranty does not cover commercial or rental use.
- Should your video housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from
flooding an O-ring sealed or water tight area will not be covered under
warranty. All O-ring sealed products undergo extensive factory pressure
testing before being shipped and delivered and are therefore guaranteed
to be sealed and functioning when shipped from the factory.
- All batteries and chargers are warranted by the original battery/charger manufacturer.
- Lithium Ion battery packs are warranted for 6 months.
- ADITECH will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- ADITECH does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ADITECH Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and ADITECH notified of the damage.
- By purchasing this product you agree and understand that in no
event will ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
