TEXT_AVIS_COOKIES MES_INFO_COOKIES x

Do you have questions?






Recsea CWC-G7XII (Canon Powershot G7X Mark II)

Manufacturer: Recsea

Availability: To Consult

The ultralight and compact plastic body, precision machined to perfectly fit the Canon Powershot G7XII camera. Extremely durable and rugged construction with full spec to 60m depth rating, yet compact with fully functional ergonomic controlability for various needs. Made from corrosion-resistant POM, key features of the CWC-G7XII housing are access to both the front and rear camera rings along with the capability to half-press the shutter release to obtain and lock the focus.

Price: $570.00

Add to Cart Do you have questions?

The ultralight and compact plastic body, precision machined to perfectly fit the Canon Powershot G7X Mark II camera. Extremely durable and rugged construction with full spec to 60m depth rating, yet compact with fully functional ergonomic controlability for various needs. Made from corrosion-resistant POM, key features of the CWC-G7XII housing are access to both the front and rear camera rings along with the capability to half-press the shutter release to obtain and lock the focus.

 

MAIN FEATURES:

  • Compact and durable, CNC precision machined corrosion-resistant POM and acrylic housing.
  • Lightweight, ergonomically designed.
  • Maximum Operating Depth (MOD) of 60 meters (197 feet).
  • Fixed Lens Port with built in M67 Adapter.
  • Port Control Dial.
  • Rear Control Wheel push button function.
  • New RECSEA dial locking system for easier opening and closing.
  • Quality silicone O-ring.
  • Complete camera function control.
  • Variety of supported RECSEA original options.
Compatible Camera:
  • Canon Powershot G7XII

Maximum Depth:

  • 60 meters (197 feet)

Material:

  • Main Body: POM
  • Lens, Back Cover, Flash Window: Hard Coat Acrylic
  • Lever, Buttons, Dials: POM, PC
  • Screws, Springs: Shafts: Stainless Steel, Galvanized

Size (Housing):

  • Dimensions: W149.3mm x D114.7mm x H101.3mm
  • Weight: Approx. 652g (Land) / 55g (Freshwater w/Camera)

Options:

  • ST Adapter AD-CBM67
  • M67-28LD Adapter AD-M67/28LD
  • Close-Up 50mm Lens SAL-01-M67
  • Close-Up Lens 50mm x2 SAL-02-M67DN (Bayonet Type w/ Ring Base)
  • ST Close-Up 50mm Lens x1 SAL-01-ST
  • ST Close-Up 50mm Lens x2 SAL-02-ST
  • ST Close-Up 50mm Lens x3 SAL-03-ST
  • CWC-G7X Housing O-ring
  • Seatool O-ring Grease 3 ml Tube
  • Left-hand Single Grip & Tray Assembly STG-06L2 (POM)
  • Dual Grip & Tray Assembly STG-06W2 (POM)
  • Left Hand Single Grip & Tray Assembly STG-05L2 (AL)
  • Dual Grip & Tray Assembly STG-05W2 (AL)
  • Left Hand Single Grip & Tray Assembly STG-05JL2 (AL)
  • Dual Grip Extension STG-05JWEP (AL)
  • Lens Caddy Arm RHA-150
  • Bayonet Mount Lens Caddy Holder STG-ADH-067
  • M67 Mount Lens Caddy STG-ADH-M67
  • ST Mount Lens Caddy ST-H-01
  • INON Tray Adapter ADT-1S
  • Tray Knurled Knob Screw
  • Recsea CWC-G7XII housing with fixed lens port
  • Diffuser
  • Strobe Mask-External Strobe Connection Mount (Fiber-Optic/SEA&SEA) and Screw
  • Wrist Strap
  • Reserve O-ring
  • O-ring Removal Pick
  • O-ring Grease
  • Product manual & warranty
RECSEA provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at RECSEA´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • RECSEA nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • RECSEA accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Nauticam does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized RECSEA Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will RECSEA, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if RECSEA or ADITECH is advised of such damages.