Overview & Features
Mangrove´s
new line of professional exploration lights is an industry breakthrough.
This underwater spot beam light is designed with an integrated battery and
lighting head in a single compact unit. The light weight construction and
penetrating beam give excellent colour and light uniformity ensuring a superior
performance for video use underwater.
The PS-5L3 is a modular light specially designed for wreck and cave diving, it is supplied with one Solid-State LED module
array emitting a staggering 3500 lumen. Sun-similar light with approx. 10° reflected beam angle and approx. 120 W
(halogen).
Key Benefits
- Long Burn Time - 140 min @ 100% / 280 min @ 50%
- High Brightness – 3500 lumen
- External Battery canister and umbilical Lighting Head
- Interchangeable heads
- Superior water penetration and colour contrast
- Excellent Colour Rendition
- >50,000 hours average LED lifetime
- Simple mechanical switch operation
- Removable LED light head for safe travel.
- Depth rated to 160 m (480 feet)
- Triple O-Ring Sealed
MAIN FEATURES
Smart Charger Lithium Ion
- Ideal For Travel: Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range.
AC adapters for the following regions are available: USA, Europe, United Kingdom, and Australia.
- Conditions Cells: The charger showcases the latest pulse charge technology; this feature
grants near complete charging while also conditioning cells over time,
resulting in longer battery life and more flashes per charge. Its
"trickle" charge mode helps maintain a
pack's charge without danger of overheating. In addition, this charger
is less likely to fail when
used with poorly regulated power sources.
Technical Specifications
PERFORMANCE
- Light Source: 3x LED
- Luminous Flux (Lumen): 3500 lm
- Beam angle (on air): 10º
- Colour temperature: 5000º Kelvin
- Colour rendering index (CRI): 85
ELECTRICAL
- Power consumption: 3x 10W
- Output levels: 100%
- Powered by: Lithium-ION battery pack 11.1 V - 5200 mAh
- Power settings: 100%, 50%
- Burn time: 140 min @ 100% / 280 min @ 50%
- Battery charger: fast multi-voltage smart charger
- Charging time: 3:00 h
MECHANICAL
- Depth rating: 160m/480 feet
- Pressure
Testing: seal
integrity and operation validated
- Body Material: Anodized 6082-T6 Alloy and Delrin
- Output Window: 8mm tempered B270 glass
- Umbilical cable length: 105 cm
- Dimensions Light head:
- Diameter head: 50mm
- Length: 90mm
- Dimensions Battery canister:
- Diameter: 64mm
- Length: 166mm
- Weight:
- Light head: 756g (land) / 237g (water)
- Battery canister: 1140g (land) / 399g (water)
What´s in the box
- Dive light PS-5L3
- Goodman handle
- Multi-voltage Smart charger
- Carry bag
Warranty
Aditech provides a limited warranty to the original purchaser against
all defects in original workmanship and material under normal SCUBA use
and service as outlined in the owner's manual for
2 years from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your video housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from flooding
an O-ring sealed or water tight area will not be covered under warranty.
All O-ring sealed products undergo extensive factory pressure testing
before being shipped and delivered and are therefore guaranteed to be
sealed and functioning when shipped from the factory.
- All batteries and chargers are warranted by the original battery/charger manufacturer.
- Lithium Ion battery packs are warranted for 6 months.
- Aditech will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Aditech does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ADITECH Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree and understand that in no
event will ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
