TRT-Electronics mini o-TTL Flash Trigger for Olympus & Panasonic MIL system cameras. The flash trigger plugs into the camera hotshoe and provides an
optical signal for fast, continuous strobe firing.
The Internal charging system works via USB AB connector (This is a normal Android phone charger)
The
package contains the o-TURTLE SMART TTL trigger for Olympus/Panasonic
cameras and the LED panel or the special cable for sync cord connection.
The flash trigger plugs into the camera hotshoe and provides an optical signal for fast, continuous strobe firing.
A lot of useful functions in one tiny device!
The world's smallest TTL controller for SONY cameras. 35 mm long, 25 mm wide and 14 mm high.
The TURTLE is juiced up to handle 2,000 images on a single charge. And it arrives bundled with a charger that allows a full recharge within 1 hour ...
Should you choose
cable or synchronous optical LED connections – Turtle has the connector
interface to handle both options. On the rear of Turtle is a connector
interface for both cable and synchronous optical LED connections.
TTL mode compatible with: Sea&Sea D1, D2, YS250, INON Z220, Z240,
Z330, Ikelite (full series). Optical sync compatible with:
Sea&Sea D1, D2, S110 Alpha and INON Z 240 ,Z330, D2000, S2000
With optical flash syncronization, you can take more pictures: no more overheating problem with the built in flash, no more single images – and it also saves battery life in the camera.
You can easily set Turtle to communicate with your underwater strobes: just use the DIP switch on the bottom of the device (4 options cover 6 strobe brands)
As small as it can get, i-TURTLE is the ultimate camera-to-strobe controller device – don’t let size fool you, this little box is a hell of a beast, wait until you unleash it’s full potential!
Forget the need of another extra battery: Turtle has it’s own inside it’s sleek package. All you need is a USB charger or anything with a USB port to charge it to full power, and it only takes an hour.
The compact flash trigger plugs into the camera hotshoe, you only need to connect the LED cable to the flash trigger and install the LEDs inside the housing
The TURTLE for Olympus TTL converter is a unit designed for underwater photographers. It automatically sets the exposure on your strobes when the strobes fire. With our product, you don’t have to worry about setting your strobe power for each shot. You’ll get a good exposure even when your subject is moving fast. But we built in the manual setting feature to the TURTLE TTL converter so whenever you want to set the power by yourself, you can do it.
If you want to connect your strobe via fiber optic cable we recommend to use multicore cable!
* Please contact us to choose the LED suitable for you, it depends on the housing, camera and strobe setup you use
Select your country and region to calculate shipping cost