Overview & Features
The Sea Frogs VPS-100 is the world´s simplest and most affordable compact pre-dive vacuum leak detector, simple user installation, no external parts.
Draw a vacuum on your housing to check for leaks prior to entering
the water. It's a simple check that helps you guard against large,
catastrophic leaks.
Use the hand pump to create a vacuum inside of the housing. Wait for a
few minutes or several hours and check to see that the vacuum has held.
KEY FEATURES
-
For
only a fraction of the price of other similar systems, you too can
now have a the
new Sea Frogs VPS-100 pre-dive vacuum leak detector that will eliminate guesswork
about the housing tightness and let you concentrate on the photography, instead
of worrying if today is maybe your turn to experience the underwater
photographer's worst nightmare.
-
The Sea Frogs VPS-100 features a calibrated pressure sensor and processor
-
The
complete electronic circuit and the battery are located in the robust anodized aluminum
one-way valve body for even more convenient operation and ease of installation.
-
The
green/red LEDs are visible through the transparent acrylic circular window.
-
The included hand vacuum pump is lightweight and requires no batteries, so
no nasty surprises when you are far from coast. It achieves required under-pressure
in average housing almost effortlessly.
-
The
installation is simple and straightforward, just screwing the detector into the
accessory port.
-
You can check the water tightness immediately after
installation, making the process risk-free.
What´s in the box
- VPS-100 vacuum leak detector
- VP-100 hand vacuum pump
- Screwdriver
- CR2032 installed button battery
- CR2032 spare button battery
- Spares O-rings
Warranty
Meikon provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for
1 year from the date of purchase, with the following exceptions and conditions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from
flooding an O-ring sealed or water tight area will not be covered under
warranty. All O-ring sealed products undergo extensive factory pressure
testing before being shipped and delivered and are therefore guaranteed
to be sealed and functioning when shipped from the factory.
- Meikon/ADITECH will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Meikon/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Meikon/ADITECH does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized Meikon Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and
ADITECH notified of the damage.
- By purchasing this product you agree and understand that in no
event will Meikon/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
