This heavy-duty Nimar housing compatible with Panasonic DC-G9 cameras is contoured to the camera, durable, and completely corrosion free. The housing is fully functional to a depth rating of 328 feet (100m).
Key Features
- Limited 2-Year Warranty
- Depth Rating: 328'(100m)
- Construction Material: Acetal Resin and Aluminum Alloy
- Mechanical Controls with Complete Access to All Camera Controls
- The
camera mounting plate does not need to be removed from the camera for
surface use or when changing the battery or memory cards
- Interchangeable Lens Port System with NIM-108 lens port base
- M14 Accessory Port (PL0290 - Sync Cable Bulkhead Optional)
- M16 Accessory Port (HDMI Bulkhead Optional)
- Vacuum Port (Pre-Dive Manual Vacuum System - NIMV Optional)
- Ergonomic Design with Alumimium Handles and Brackets equipped with 1"(25mm) ball mounts for connecting optional lighting arms
- Viewfinder: Enhanced 180° viewfinders Optional
- Moisture Alarm
- Snap Locking Latches
- Luminescent Buttons
- Syncro Flash Trigger
- Dual Fiber Optical Direct Plug-In
- Tripod Mounting Point
Overview
Made of black Delrin acetal resin, this underwater housing from Nimar is a waterproof housing
enabling you to shoot beneath the surface with your camera. It has a depth rating of 100m/328'. The
ergonomic side handles, the practical mechanical controls, the eyepiece
with 1.5x magnification and the complete range of accessories provided
complete the product.
Lens ports
can be removed and replaced quickly with a simple positive locking system which provides visible
assurance when the housing is assembled properly.
The camera mounting plate does not need to be removed from the camera
for surface use or when changing the battery or memory cards.
Construction
Built for durability, the housing is constructed from
corrosion-resistant Delrin acetal resin and aluminum alloy. It also features three snap locking latches. This housing requires the addition of a compatible lens port for waterproof operation. Interchangeable ports
are available for an array of wide-angle, macro, zoom and fisheye
lenses.
Controls
Mechanical controls provide access to all camera
functions.
Luminescent Buttons
Handling
- Removable, ergonomic aluminium side handles provide a comfortable
grip and improved handling underwater, and feature three 1" (25mm) ball mounts for optional
lighting arm attachment.
Lens Port System
Lens port required and sold separately.
Interchangeable
Lens Port System with removable mount ring compatible with NIM-108 bayonet
mount.
Port Lock System prevents an attached port from loosening while in use
An array of interchangeable ports is
available for various wide-angle, macro, zoom and fisheye lenses.
A lens release button allows easy changeout of lenses without removing camera from housing
Viewfinder
The housing is also equipped
with a removable optical viewfinder, which offers 1.5x magnification
and a rubber hood to block stray light for better visibility.
An optional Inon 180° or 45° viewfinder cab installed upon request
Moisture Alarm & Vacuum System
Alerts you to a breach in the housing's waterproof seal, so
you can get to the surface before your camera and lens sustain any
damage
Vacuum valve included; Test your system after assembly prior to entering the water; Pump sold separately
External Flash Bulkhead
Optional Nikon 5-pin bulkhead connector with manual hotshoe for
reliable electrical triggering of underwater strobes
The housing has also a M14 Port for TTL Trigger / 2nd Sync Cable Bulkhead. The optional i-Turtle TTL
circuitry provides automatic exposure with Inon, and Sea&Sea strobes and can be easily installed in that M14 port.
NIMAR provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for
2 years from the date of purchase, with the following exceptions:
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at NIMAR´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- NIMAR nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- NIMAR accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized NIMAR Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will NIMAR, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if NIMAR or ADITECH is advised of such damages.