TEXT_AVIS_COOKIES MES_INFO_COOKIES x

Do you have questions?






Mangrove Pressure Leak Detector for Ikelite (PLD-IK)

Manufacturer: MANGROVE UW

Availability: To Consult

The Mangrove PLD-M14 is the world´s simplest and most affordable compact pre-dive vacuum leak detector, simple user installation. Compatible with the ½"-20 threaded accessory port provided on the side of the Ikelite housing for easily installation of the optional Vacuum. Just remove the plug of the accessory port from the housing and tighten the vacuum valve to the housing with the tool provided.

Price: $135.00

Add to Cart Do you have questions?

The Mangrove PLD-M14 is the world´s simplest and most affordable compact pre-dive vacuum leak detector, simple user installation. Compatible with the ½"-20 threaded accessory port provided on the side of the Ikelite housing for easily installation of the optional Vacuum. Just remove the plug of the accessory port from the housing and tighten the vacuum valve to the housing with the tool provided.


KEY FEATURES

  • For only a fraction of the price of other similar systems, you too can now have a the new Mangrove PLD-IK pre-dive vacuum leak detector that will eliminate guesswork about the housing tightness and let you concentrate on the photography, instead of worrying if today is maybe your turn to experience the underwater photographer's worst nightmare.
  • The Mangrove PLD-IK features a calibrated pressure sensor and processor
  • The complete electronic circuit and the battery are located in the robust anodized aluminum one-way valve body for even more convenient operation and ease of installation.
  • The green/red LED is visible through the transparent acrylic circular window.
  • The included hand vacuum pump is lightweight and requires no batteries, so no nasty surprises when you are far from coast. It achieves required under-pressure in average housing almost effortlessly.
  • The installation is simple and straightforward, just screwing the detector into the ½"-20 threaded accessory port provided on the side of the Ikelite housing.
  • You can check the water tightness immediately after installation, making the process risk-free. 
  • The circuit is self-calibrating, and as such suitable for altitude diving.
  • PLD-IK vacuum leak detector
  • Hand vacuum pump with pressure gauge
  • Mounting tools
  • 2x LR44 installed button batteries
  • User´s manual
Aditech provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 2 years from the date of purchase, with the following exceptions:
  • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Advanced Diving Technologies´ discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • All batteries and chargers are warranted by the original battery/charger manufacturer.
  • Lithium Ion battery packs are warranted for 6 months.
  • Aditech will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • ADITECH accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Aditech does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes bulbs, lenses, cords, wet connectors, O-rings, fuses or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized ADITECH Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will ADITECH, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ADITECH is advised of such damages.