TRT-Electronics mini i-TTL Flash Trigger for Nikon DSLR cameras. The flash trigger plugs into the camera hotshoe and provides an
optical signal for fast, continuous strobe firing.
The Internal charging system works via USB AB connector (This is a normal Android phone charger)
The
package contains the i-TURTLE SMART TTL trigger fpr Nikon cameras and
the LED panel or the special cable for sync cord connection.
The flash trigger plugs into the camera hotshoe and provides an
optical signal for fast, continuous strobe firing.
A lot of useful functions in one tiny device!
The world's smallest TTL controller for Canon and Nikon cameras. 35 mm long, 25 mm wide and 14 mm high.
The TURTLE is juiced up to handle 2,000 images on a single charge. And it arrives bundled with a charger that allows a full recharge within 1 hour ...
Should you choose cable or synchronous optical LED connections – Turtle has the connector interface to handle both options. On the rear of Turtle is a connector interface for both cable and synchronous optical LED connections.
TTL mode compatible with: Sea&Sea D1, D2, YS250, INON Z220, Z240, Z330, Ikelite (full series). Optical sync compatible with: Sea&Sea D1, D2, S110 Alpha and INON Z 240 ,Z330, D2000, S2000
With optical flash syncronization, you can take more pictures: no more overheating problem with the built in flash, no more single images – and it also saves battery life in the camera.
You can easily set Turtle to communicate with your underwater strobes: just use the DIP switch on the bottom of the device (4 options cover 6 strobe brands)
As small as it can get, i-TURTLE is the ultimate camera-to-strobe controller device – don’t let size fool you, this little box is a hell of a beast, wait until you unleash it’s full potential!
Forget the need of another extra battery: Turtle has it’s own inside it’s sleek package. All you need is a USB charger or anything with a USB port to charge it to full power, and it only takes an hour.
The compact flash trigger plugs into the camera hotshoe, you only need to connect the LED cable to the flash trigger and install the LEDs inside the housing.
The TURTLE for Nikon TTL converter is a unit designed for underwater photographers. It automatically sets the exposure on your strobes when the strobes fire. With our product, you don’t have to worry about setting your strobe power for each shot. You’ll get a good exposure even when your subject is moving fast. But we built in the manual setting feature to the TURTLE TTL converter so whenever you want to set the power by yourself, you can do it.
If you want to connect your strobe via fiber optic cable we recommend to use multicore cable!The market is evolving every minutes and we would like to follow that.
A few years ago we used analog camera systems underwater, like the then popular Nikon F100 in Subal housing with Ikelite strobes. Later they introduced digital cameras and everyone changed their underwater setups. The photographers still used Nikon and Canon camera models but they chose the digital strobes like Ikelite DS 125 to use in TTL mode. It was capable of communicating with the camera, using preflash and making a good shot via digital communication (i-TTL).
The Nikon's latest development is a new system which they call Unified flash system. This is the best solution for the underwater photographers as it allows switching the mode from TTL to Manual and set the strobe power level in the camera menu.
We implemented this new control system in the i-TURTLE SMART TTL trigger unit. But this system does not work with the older camera models. The i-TURTLE SMART works with these Nikon camera models (latest camera firmware version required!):
D5, D4s, D4, D850, D810, D810A, D750, D600, D500, D300, D300s, D7500, D7200, D7100, D7000, D90
In the attached table you will find the Unified flash system compatible camera models in the A, B,C,D group.
* Please contact us to choose the LED suitable for you, it depends on the housing, camera and strobe setup you use
Select your country and region to calculate shipping cost
