Customer Support
+34 972 661 661
Price (inc. VAT)
€699.00
€804.00
Offer
-13%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€49.00
€69.00
Offer
-29%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%

Sea&Sea MDX-Z7II (for Nikon Z7II/Z6II/Z7/Z6)

Manufacturer: Sea&Sea
Availability: Usually ships in 2-3 weeks, on request only, no refunds
Share
Sea&Sea housing MDX-Z7II (#06208) for Nikon Z7II/Z6II/Z7/Z6

Price (exc. VAT) €2,851.24

Price (inc. VAT) €3,450.00

Shipping cost from €58.00
Calculate shipping cost

Add to Cart

MDX-Z7II housing for Nikon Z7II/Z6II/Z7/Z6

Sea&Sea housing MDX-Z7II (#06028) for Nikon Z7II/Z6II/Z7/Z6

Designed to be compact and lightweight.

Taking advantage of the Z7/6 camera’s compact design and light weight, the housings has been designed accordingly to enhance these features. Compared to SLR MDX-850 camera housing, the MDX-Z7II is 100g/3.5oz lighter in weight on land. 

Ports and gears for the MDX series SLR housings can be used.

The MDX-Z7II is compatible with the system chart for the MDX series SLR housings. You can utilize F-mount lenses with the mount adapter FTZ and ports/gears for the MDX series housings.

Compatible with Optical YS Converter N1. TTL strobe photography possible.

An optional Optical YS Converter which converts the camera’s hot-shoe TTL signal into an LED light signal is compatible with the housing. Manual strobe photography is also possible.

Designed for both F mount lenses with the mount adapter FTZ and Z mount lenses.

The Focus/Zoom dial has two gears, one for F-mount lenses with the mount adapter FTZ and the other for Z mount lenses. The MDX-Z7 has been designed to take into consideration various Z mount lenses which will soon be available.

The camera’s upper control panel is visible.

A window for the camera’s upper control panel is also incorporated. As brightness of the camera’s upper control panel has increased, the visibility is now greatly improved.

MDX-Z7II Other Features

  • The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
    The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
  • Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
  • All controls have luminescence stickers which glow in dark environment.
  • Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as Optical Viewfinder 0.66x,and 0.8x can be used.
  • Some vignetting occurs when the VF45 and VF180 1.2x is mounted on housing, the  corners of the camera's viewfinder cannot be viewed due to vignetting. 
  • Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only).
  • Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
  • Equipped with under guard to protect from scratch.
  • Precision machined from a single aluminum block. Fully anodized
  • All function labels are pad printed to prevent peeling off or fading.
  • Accurate ergonomic design and excellent underwater balance
  • Synchro socket: 2 optical sync socket are built-in.
  • Finishing: Anodized coating after barrel sanding.
  • Camera installation: Saddle-way.
  • Handles: two ergonomic hand grips
  • Construction:
    • Housing body: Anodized aluminum alloy
    • Display window: Abrasion resistant polycarbonate
    • Grip handles: Polycarbonate and rubber
  • Dimensions:
    • Width: 339 mm(with handles)
    • Height: 169 mm
    • Length: 158 mm
  • Weight: Approx. 2.7 kg (without camera)
  • Depth rating: 330 feet/100 meters
  • Sea&Sea MDX-Z7II housing without port
  • Grips, (left and right hand)
  • Spare main O-ring
  • Container of O-ring lubricant
  • Owner manual
    Sea&Sea provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
    • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Sea&Sea´s discretion, free of charge, excluding shipping and handling charges.
    • Repairs made under this warranty will not extend the warranty period
    • This warranty is non-transferable and applies to the original purchaser only.
    • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
    • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
    • Sea&Sea nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
    • Sea&Sea accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
    • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
    • Sea&Sea does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
    • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
    • This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
    • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
    • Modifications or repair by anyone other than an authorized Sea&Sea Dealer or ADITECH Service Department will void the warranty.
    • By purchasing this product you agree and understand that in no event will Sea&Sea, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Sea&Sea or ADITECH is advised of such damages.

    Do you have any doubts?