Overview & Features
Digital Lighting package for compact and mirrorless IL camera housings, it
comes with a video light PV22, universal tray Mangrove SH-01-BJ, clamp and arm
adapter.
Scubalamp PV22, amazing new video & focus light with white and red lights. We have packed a lot of features in to a
very compact
package this time around. To start we have a massive 2000 lumen of
white light at a
very wide and smooth 100 degree beam to cover all of your regular video
& photo lighting needs. To top it
off we included red LED’s!
Awesome light for video, macro, UV photography and underwater photography in general!
KEY FEATURES
-
Lumens: 2000/1000 in flood
-
Beam Angle: 100º flood, 15º spot
-
Long Burn Time, 2 h @ wide 3000 lumen mode & 6 h @ spot 1000 lumen
- Flicker-free firmware design
- LED low battery alarm, Green (> 70%), Yellow (<70%), Red (<30%)
- Integrated Battery and Lighting Head
- Superior water penetration and colour contrast
- Excellent Colour Rendition
- >50,000 hours average LED lifetime
- Patented mechanical push button
switch
- Removable battery pack for safe travel.
- Depth rated to 100 m (330 feet)
- Double O-Ring Sealed
- Wide range of mounting options
PRODUCT DETAILS
-
The PV22 is designed to be used as
primary video lighting for any underwater video, digital still or digital
SLR system.
-
A perfectly diffused 100 degree beam underwater provides
even coverage from macro to wide angle.
-
Near daylight 5600º Kelvin colour temperature
ensures the most true, natural tones especially when combined with ambient
light in seascapes.
-
The light head's powerful 2000 lumen beam may be
reduced from 100% to 50% to fine-tune exposure and extend
battery life.
-
We have built in our patented mechanical push button
switch to turn the light on-off, and cycle through the modes.
-
The heavy-duty and reliable mechanical switch is
within easy reach and features click-stops to indicate power setting by
feel.
-
Equipped with LED low battery alarm that changes colour (green, yellow, and red) depending on battery capacity
-
The PV22 has been designed and manufactured using high quality components to withstand harsh environments.
-
The PV22 is equipped with a 25mm ball mount, the 1" (2.5cm) ball arm system is compatible with arm systems
from several manufacturers. This can be replaced with an
optional YS mount or carry handle
-
Using a single battery lithium pack creates a very compact light weight package.
-
Additional battery packs may be purchased
separately to quickly exchange for a fully charged pack and keep shooting.
Technical Specifications
PERFORMANCE
- Light Source: 4x CREE XM-L2 (white), 2x CREE XPE R2 (red)
- Light Colors: white, red
- Power consumption:
- White LEDs: 4x 5W
- Red LEDs: 10 W
- Luminous Flux (Lumen):
- White LEDs (100%): 2000 lm
- White LEDs (50%): 1000 lm
- Red LEDs: 300 lm
- Beam angle: 100º
- Colour temperature: 5600º Kelvin
- Colour rendering index (CRI): 82
ELECTRICAL
- 2-steps dimming (white): 100-50%
- Modes: 2x white flood, 1x red
- Switch: Patented mechanical push button
- Battery capacity indicator LED: green (> 70%), yellow (<70%), red (<30%)
- Powered by: 1x 26650 Li-ion rechargeable battery pack, 4.2 V, 18.5 Wh
- Burn time (@ 100%): 150 min
- Burn time (@ 50%): 300 min
- Burn time (Red LED): 270 min
- Cycle life at 23ºC: after 800 cycles +/- 70% available capacity
- Charging time: 7 h @ 80% capacity
MECHANICAL
- Depth rating: 100m/330 feet
- Pressure
Testing: seal
integrity and operation validated
- Body Material: Aluminum head, and body
- Treatment: Hard-anodizing type III
- Output Window: 4mm clear PC
- Arm bracket: supplied with 25mm ball mount
- Dimensions:
- Diameter: ø 42/32 mm
- Length: 131 mm
- Weight: 300g (land) / 169g (water)
What´s in the box
- Video light PV22
- Li-ion rechargeable battery 1x26650 (18.5 Wh)
- Light adapter with 25mm ball mount
- Spare O-rings
- Battery charger
- Carry case
- User´s manual
- Tray SH-01-BJ
- Clamp C-BJ
Warranty
Scubalamp provides a limited warranty to the original purchaser against
all defects in original workmanship and material under normal SCUBA use
and service as outlined in the owner's manual for
15 months from the date of purchase, with the following exceptions:
- Should your equipment prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from flooding
an O-ring sealed or water tight area will not be covered under warranty.
All O-ring sealed products undergo extensive factory pressure testing
before being shipped and delivered and are therefore guaranteed to be
sealed and functioning when shipped from the factory.
- All batteries and chargers are warranted by the original battery/charger manufacturer.
- Lithium Ion battery packs are warranted for 6 months.
- Aditech will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Scubalamp/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Aditech does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized Scubalamp Dealer or Scubalamp Service Department will void the warranty.
- By purchasing this product you agree and understand that in no
event will Scubalamp/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if Scubalamp/ADITECH
is advised of such damages.
