Overview & Features
Sea Frogs SFA-A7RIII Housing for Sony A7R-III/A7III
The new Sea Frogs SF-A7RIII underwater housing for A7R-III/A7II is an
outstanding example of the next generation of high-end housings for
compact cameras. With excellent fit and finish, rugged construction, and
meticulous attention to detail, all in a user friendly sized package,
this is a beautifully executed housing. Ergonomic command dials make
this housing a joy to use.
Product Highlights
- Fits Sony A7R-III/A7III Digital Cameras
- 100m Depth Rating
- Dual O-rings
- Lever-Type Shutter Release
- Inbuilt leak sensor
- Port for vacuum test system
- Multi coated optical glass standard flat port
The Sea Frogs SFA-A7RIII Housing is
manufactured to the highest professional standards of function, style
and durability. It is depth rated to 100m/325 feet and is fully
functional with ergonomically designed and labeled controls. With this special design case, every key of the camera can be pressed to control freely as you want.
The primary application of this underwater housing is underwater
photography/videography. However it can do a lot more by protecting your
camera from weather hazards such as rain, dust, snow etc. Because of
its compact size and near all functionality, it is an ideal item to have
while traveling.
The
FPA-D127x104 flat port for SEL2870 is compatible with the following lenses:
- Sony FE 16-35mm F4 ZA OSS (optional manual zoom gear, 17-35mm)*
- Sony FE 24-70mm F4 ZA OSS (possible only at 24mm)
- Sony FE 24mm F1.4 GM (only in autofocus mode)
- Sony FE 28-70mm F3.5-5.6 OSS (manual zoom gear included)
- Sony FE 50mm F1.8 (only in autofocus mode)
- Sony FE 50mm F2.8 Macro (only in autofocus mode)
- Sony FE 55mm F1.8 ZA Carl Zeiss Sonnar T (only in autofocus mode)
- Sony FE 85mm F1.8 (only in autofocus mode)
The FPA-D127x129 flat port for SEL90M28G is compatible with the following lenses:
- Sony FE 90mm F2.8 Macro G OSS (manual focus gear included)
- Sigma 35mm F1.4 DG Art E-mount (manual focus gear included)
- Sony FE 24-70mm F4 ZA OSS (optional manual zoom gear, 35-70mm)*
- Sony FE 24-105mm F4 G OSS (optional manual zoom gear, 28-65mm)*
The
FPA-M67x126 flat port for SEL90M28G is compatible with the following lenses:
- Sony FE 90mm F2.8 Macro G OSS (manual focus gear included)
The
WA6M-B-PC (polycarbonate dome)/
WA6M-B-GL (optical glass dome) dome ports are compatible with the following lenses:
- Sony FE 12-24mm F4 G (optional manual zoom gear)*
- Sigma 14-24mm F2.8 DG DN Art (optional manual zoom gear)*
- Sony FE 16-35mm F4 ZA OSS (optional manual zoom gear)*
- Sony FE 16-35mm F2.8 GM (optional manual zoom gear)*
- Tamron 17-28mm F2.8 Di III RXD (optional manual zoom gear)*
- Sony FE 24mm F1.4 GM (only in autofocus mode)
- Sigma 24mm F1.4 DG HSM Art (only in autofocus mode)
- Sony FE 24-70mm F4 ZA OSS (optional manual zoom gear)*
- Sigma 28mm F1.4 DG HSM | Art (only in autofocus mode)
- Sony FE 28mm F2 + Fisheye Converter SEL057FEC (only in autofocus mode, minor vignetting effect)
- Sony FE 28mm F2 + Ultra Wide Converter SEL075UWC (only in autofocus mode)
- Sony FE 28-70mm F3.5-5.6 OSS (optional manual zoom gear)*
- Tamron 28-75mm F2.8 Di III RXD (manual zoom gear not available)
- Sony Distagon T* FE 35mm F1.4 ZA (only in autofocus mode)
- Sony FE 55mm F1.8 ZA Carl Zeiss Sonnar T* (only in autofocus mode)
- Sony FE 85mm F1.8 (only in autofocus mode)
- Sony FE 90mm F2.8 Macro G OSS (optional focus zoom gear)*
The
WA6M-A-PC (polycarbonate dome)/
WA6M-A-GL (optical glass dome) dome ports are compatible with the following lenses:
- Sigma 24‑70mm F2.8 DG DN Art (optional manual zoom gear)*
- Sony FE 24-70 mm F2.8 GM (optional manual zoom gear)*
* select optional zoom or focus ring from drop down options window when ordering
MAIN FEATURES
Technical Specifications
- Colors: Black anodized
- Material: Corrosion resistant aluminum alloy
- Nikonos 3 pin bulkhead connector
- Manufacturing: CNC machining
- O-ring sealed buttons with spring loaded mechanism to protect your camera properly
- All function labels are pad printed to prevent peeling off or fading.
- Interchangeable lens port system
- Accurate ergonomic design and excellent
underwater balance
- Some camera functions are not available inside the unit: Front Dial below shutter release button
- Dimensions:
- Width (with handles): 322 mm
- Height: 183.5 mm
- Length: 214 mm
- Weight: Approx. 2.660 kg
- Depth rating: 100m/328 feet
What´s Included
- Waterproof Case SFA-A7R-III v2
- Right & Left handles
- Leak detector
- Wrist landyard
- Neck strap
- Spare O-Ring seal (housing)
- Spare O-Ring seal (port)
- Silicone grease
- Lens cleanning tissue
- 12x anti fog pads
- User manual
Warranty
Meikon provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for
1 year from the date of purchase, with the following exceptions and conditions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from
flooding an O-ring sealed or water tight area will not be covered under
warranty. All O-ring sealed products undergo extensive factory pressure
testing before being shipped and delivered and are therefore guaranteed
to be sealed and functioning when shipped from the factory.
- Meikon/ADITECH will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Meikon/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Meikon/ADITECH does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized Meikon Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and
ADITECH notified of the damage.
- By purchasing this product you agree and understand that in no
event will Meikon/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs