Customer Support
(254) 654-0522

INON UWL-95 C24 M67

Manufacturer: Inon
Availability: Usually ships in 2-3 business days
Wet mount wide angle converter, dual use (land/underwater) wide conversion lens specially designed for 24mm wide camera (35mm film equivalent). The maximum view angle is 95° underwater for wide imaging and 159° on land for fish-eye imaging. Combination with optional super wide option Dome Lens Unit IIIA/Dome Lens Unit IIIG further increases view angle underwater up to 141° (*1).

Price $505.00

Shipping cost from $28.00
Calculate shipping cost

Add to Cart

UWL-95 C24 M67 Wide Angle Conversion Lens

Totally renewed optical design successfully supports shooting at 24 mm wide end by a digital camera equipped with large 1.0-type image sensor without vignetting to benefit enjoying quality underwater wide imaging in any situation.

Dual Use Land/Underwater

Maximum angle of view underwater is approx. 95°. When using on land, maximum angle of view increases approx. 159° to easily enjoy fisheye effect. Miniaturized lens body benefits you to capture both a subject in confined area and open space with camera stored in a housing. Combination with dedicated optional Dome Lens Unit III further increases maximum underwater angle of view up to 141°.

Minimum Focusing Distance 0cm

Installing the UWL-95 C24 on compatible camera/housing will have minimum focusing distance 0cm*. A subject just in front of the lens or distant seascape never get out of focus. The lens won’t limit shooting distance.
*When shooting at zoom wide end.

Renewed Optical Design for Quality Underwater Images

Redesigned optical construction effectively suppresses flare/ghosting even in unfavorable condition like shooting a subject with backlight. Optimized optical design for compatible cameras’ master lenses, brings out sharp contrast and clear images

Optical Anti-Reflection Coating (AR-Coating)

Having AR-coating on each optical element provides clear and stable image quality in any situation including unfavorable condition likely to have flare/ghosting.

Usable with All Zoom Range

Usable throughout all zoom range when using the UWL-95 C24.

Versatile Three Different Lens Mounts

Available lens mounts are M67 Type1, M67 Type2 and M52. Newly introduced M52 mount is directly screwed in a housing lens port with M52 thread without a step-up ring.

Super Wide Option Compatibility for Underwater Angle of View 141°

Installing optional Dome Lens Unit IIIA/Dome Lens Unit IIIG increases the UWL-95 C24 native underwater angle of view 95° to 141°.
[UWL-95 C24 M67Type1/Type2]
Outer diameter φ90.0 mm/3.5 in
Length 48.2 mm/1.9 in
Weight [air] 618 g/21.8 oz [underwater] approx.396 g/14.0 oz
Mount system INON M67 Mount
Depth rating 60 m/196.9 ft
Material Corrosion-resistant aluminum alloy
Surface finishing Rigid black alumite
Glass/Coating Optical glass/both side anti-reflection coating
Lens construction/magnification 3 groups 4 elements/0.63 (afocal)
Max. view angle (*1) [underwater] approx. 95°, [air] 159.0°
  • UWL-95 C24 M67 lens
  • Front lens cap
  • Rear lens cap
Inon provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Inon´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Inon nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • Inon accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Inon does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Inon Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will Inon, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Inon or ADITECH is advised of such damages.