This powerful compact housing packs in all of our latest upgrades to
controls and ergonomics. The shutter lever has been updated to a more
sensitive and natural feeling curved design. The standard control hugs
the side of the housing for comfortable use when hand holding. It can be
easily extended using the optional Shutter Trigger Extension # 4077.93
to put it within easy reach when using a right-hand quick release
handle. The customizable * button is accessed by a lever placed right
where your thumb is for quick access to a variety of useful features.
Less often accessed controls are located in the same configuration as on
the camera to replicate the muscle memory and familiarity you've
developed with your camera on the surface.
The push buttons have been redesigned to reduce weight and salt build-up. The video record start/stop button is bright red anodized so that you never miss the action. The back of the housing features laser engraved control symbols which will never fade or fall off.
The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
The included Supereye Viewfinder provides a clear view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 1) # 6891.1.
The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.
Light is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away.
An integrated TTL circuit is fine-tuned to the Olympus O-MD E-M1 Mark III flash
exposure protocol for the most accurate exposure possible. The circuit
is powered by the strobe for zero maintenance and no batteries to
change. Exposure compensation in TTL mode is supported using the
camera's built-in control. At this time, only Ikelite DS strobes are
capable of powering the circuitry. SEA&SEA, INON, and Nikonos
strobes will still enjoy fast recycle times and improved battery life,
but must be used in manual exposure modes only.
This housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a light bulb, and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA&SEA, INON, or Nikonos strobes for ultimate versatility.
A bright constant-on video light can be used instead of or in
addition to a flash. A constant-on light is not as bright as a strobe
flash. Constant-on lights do provide added versatility because they can
be used for focus assist and for improved colors when shooting video.
Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.
There is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any camera system.
Changing lenses and ports is super simple—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.
This housing accepts a variety of ports from our DLM Port System
(Type B mount) to accommodate the most popular zoom, macro, and wide
angle lenses. Our custom optical grade acrylic domes components provide
the color, clarity, and durability of glass at a fraction of the travel
weight and cost.
Lens port sold separately.
Our new white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.
The unique rear seal design prevents accidental twisting or
stretching of the o-ring for simple and confident assembly. We have
eliminated the need for an o-ring groove or channel which can trap sand,
dirt, or debris. Two double-passivated stainless steel locking lid
snaps are simple to use and virtually unbreakable. The clear back allows
you to see the o-ring form a solid, watertight seal as it closes.
A spare 1/2"-20 threaded accessory port is provided on the side of the housing for easily installation of the optional Vacuum Kit #47012. A vacuum kit allows you to pressurize the housing to check for proper assembly prior to entering the water.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.
This housing is designed for use with the Olympus O-MD E-M1 Mark III camera. We are not aware of any other camera models which may be used in or adapted to this particular housing.
Select your country and region to calculate shipping cost