Overview & Features
Isotta housing a7SIII
An easy to use highly professional product has been created through
techniques and innovations gained from years of experience. Easy access
to all key/main camera controls, even with gloves, by means of clearly
labelled lasered long life buttons.
The back door has a large window
glass for a fine camera display and optical viewfinder view and it is
entirely detached from the front body to make easier the camera fitting.
The housing stands with great stability due to sturdy and wide rubber feet located on the bottom.
ONE HAND OPEN/CLOSE
It's very easy to open and
close Sony a7S III, without efforts by the user thanks to the upper
helicoid and the bottom centered pins; the camera is placed easily into
the housing on a sliding tray that keeps the camera robustly in place.
PORTS AND EXTENSION RING
A series of ports and
extension rings are available in the dedicated section. The removable
port is fitted thanks to markers and a bayonet 120 mm connection to the
Sony a7S III housing. The interchangeable port bodies and extensions
rings allow the use of most of lenses on the market for maximum
versatility and performance.
LIGHTING
Two fiber optic connections are placed in front of the built-in flash and allow the use of external strobe.
CONSTRUCTION AND SAFETY
Only the best materials
are used to manufacture our housings such as anodized aluminum, which is
anticorodal and thermo-coated, and stainless steel. A longlasting
product that requires easy and simple maintenance by the user. Dual high
precision and quality O-Ring seals protect and ensure a perfect and
secure watertight for all movable and / or removable parts; a red alarm
for humidity/water inside the housing is powered by a battery
replaceable by the user. Working depth is 100 metres. Different
accessories can be fitted directly on the handles or by means of an M8
upper threaded hole, using the Isotta top handle or via the M6 and M8
threaded holes on the bottom.
CONTROLS
-
ON/OFF of Sony a7S III
-
Own camera strobe open/close
-
Ergonomic camera focusing and shutter button for an easy use with gloves
-
Lens release
-
Rear control panel
-
Upper control panel
-
All controls are available on the housing
Technical Specifications
- Red color anodized aluminum body
- Ergonomic side handles, adjustable (via optional accessory)
- Two fiber optic connector
- Two M16 and one M28 ports for installation of accessories, e.g. vacuum valves or monitors
- Back housing completely detachable from the front housing
- Tray with lock for the easy insertion of the camera
- Single-hand closing knob for back housing
- Aluminum buttons and dials with engraved symbols identical to camera controls
- Wide back display viewfinder glass with optical viewfinder
- Double O-Ring seals on all buttons and removable parts
- Moisture sensor with LED indicator (replaceable battery)
- Removable port - 120 mm bayonet
- Ports security latch to prevent accidental opening
- Wide, rubber covered feet for solid footing on boat floors or sea floor
- M8 hole located on upper side of the housing for various accessories such as focus lights
- Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods
- External viewfinders can be mounted, INON X-2 compatible
- Depth rated to 100 metres
- Dimensions:
- Width: 282 mm
- Height: 126 mm
- Thickness: 185 mm
- Weight: Approx. 2.3 kg (without camera)
- Depth rating: 100 metres
What´s Included
- Housing
- Front lid
- Handles
- ISOTTA standard viewfinder
- Moisture sensor
- Fiber optic connections
- Spare o-ring kit
- Silicone grease 15gr / 0,5 oz
- 2 years manufacturer warranty
Warranty
ISOTTA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for
2 years from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- ISOTTA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- ISOTTA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ISOTTA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ISOTTA or ADITECH is advised of such damages.