Overview & Features
Sea Frogs SF-EOSZ7II Housing for Nikon Z7II/Z6II
Sea Frogs SF-Z7II underwater housing with interchangeable lens port system, designed for Nikon Z7II/Z6II. The Sea Frogs housing is manufactured to the highest professional standards of function, style and durability. It is depth rated to 40m/130 feet and is fully functional with ergonomically designed and labeled controls. With this special design case, every key of the Nikon ZZ7II/Z6II can be pressed to control freely as you want. Each housing is tested individually to prevent any accidents. Sea Frogs provides excellent quality for a reasonable price.
It features a camera quick shoe for easy mounting and removal of the camera. There are 2 fiber-optic cable sockets. When you connect the fiber-optic cable to the connector, the light of the digital camera's built-in flash is detected and connected to an external strobe to improve lighting quality.
Its easily-operated shutter lever is excellent for taking quick snapshots. Push from the top or pull from the front to operate the lever. There's a smooth halfway press for adjusting the autofocus, so you need not worry about any missed chances.
The Sea Frogs housing is ideal for outdoor and underwater photography. Underwater photographers can dive or snorkel and capture all the excitement of this fascinating world, while outdoor photographers also have the option of capturing the action of activities such as white water paddle sports, sailing, boating, surfing, fishing, hunting, backpacking and camping. The SF-Z7II housing is shock resistant and protects the camera from water, sand, dust, frost and other damaging elements.
The Sea Frogs SF-Z7II housing was designed to be compatible with a complete accessory system, enabling photographers to enhance the quality of their images. It has an interchangeable front port system with several flat ports and dome ports to choose from depending on the lens you want to use.
Compatible Lenses
The FP-D177x151 flat port with Ø150mm lens is compatible with the following lenses:
- AF-S NIKKOR 16-35mm f/4G ED (manual zoom gear available)*
- NIKKOR Z 24-70mm f/2.8 S (manual zoom gear available)*
- Tamron SP 24-70mm F/2.8 Di VC USD (manual zoom gear not available)
- Tamron SP 24-70mm F/2.8 Di VC USD G2 (manual zoom gear not available)
- AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED (only in autofocus mode)
The WA005-A (polycarbonate dome)/WA005-A-GL (optical glass dome) dome ports are compatible with the following lenses:
- AF-S NIKKOR 16-35mm f/4G ED (manual zoom gear available)*
- NIKKOR Z 24-70mm f/2.8 S (manual zoom gear available)*
- Tamron SP 24-70mm F/2.8 Di VC USD (manual zoom gear not available)
- Tamron SP 24-70mm F/2.8 Di VC USD G2 (manual zoom gear not available)
- AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED (only in autofocus mode)
The WA005-B (polycarbonate dome)/WA005-B-GL (optical glass dome) dome ports are compatible with the following lenses:
- AF-S FISHEYE NIKKOR 8-15mm f/3.5-4.5E ED (manual zoom gear available)*
* select optional zoom or focus ring from drop down options window when ordering
Main Features
- Housing molded of corrosion free clear polycarbonate, durable and resistance to corrosion
- The housing is rated to 40m/130ft depth, and is rugged and ready for use!
- Ergonomic design
- Clear view the camera information and control function
- Ensures that camera stays clean and dry
- Interchangeable lens port system
- Super clear lens for optimal picture quality
- The scratch-resistant glass lens port provides full use of the camera's zoom range without vignetting.
- Perfect in humid and wet conditions, salt spray, dust or snow,
ideal for diving, surfing, snorkeling, skiing, yacht or other activities
- Provides mechanical controls for the main camera functions
- Each control on the housing is clearly labeled, making it easy to learn the system
- Large, easy to see buttons allow camera operation underwater, even with diving gloves
- A top accessory shoe is available for working with an optional external flash
- Dual Fiber optical direct plug-in
- Nikonos 3 pin bulkhead connector for external flash
- This housing features two 1/4-20 threaded tray mounts on the
bottom of the housing for the attachment of a tray and handle system.
Handles provide improved ergonomics underwater and are the foundation
for your lighting mounts.
- Easy and secure installation of camera
- O-ring sealed with spring-loaded
- Easy open latch and drop in camera loading make set-up a breeze.
- Viewfinder: the viewfinder has 1.5x magnification and a rubber hood to help block stray light for better visibility
- Leak detector: the Sea Frogs housing is offered as
standard equipment with a built-in leak detector that will immediately
activate a loud buzzer and a LED located at the rear of the housing in
the event water should find its way past the o-ring seals, the water
detector is located next to O-ring sealing and at the lowest point (in
usual operating position) of the case
- Port for vacuum test system: A threaded accessory port on the
side of the housing is the perfect location for the installation of the
optional vacuum leak check circuitry and valve. The Vacuum system allows
you to pull a vacuum on the housing to simulate pressure at depth and
check for leaks prior to entering the water.
- Compatible with a wide range of underwater photo accessories
Technical Specifications
- Materials:
- Polycarbonate
- ABS plastic
- Clear plate glass
- Stainless steel
- EPDM rubber
- O-ring sealed buttons with spring loaded mechanism to protect your camera properly
- Locking system: (3) tension latch with secondary lock
- All function labels are pad printed to prevent peeling off or fading.
- Accurate ergonomic design and excellent
underwater balance
- Dual Fiber optical direct plug-in
- Nikonos 3 pin bulkhead connector
- Dimensions (without port):
- Width: 190 mm
- Height: 150 mm
- Length: 100 mm
- Weight (without port): Approx. 878 g
- Depth rating: 130 feet/40 meters
- Manufactory certificated: ISO9001, CES and IPx8
What´s in the box
- Housing Sea Frogs SF-Z7II
- Leak detector
- Wrist landyard
- Neck strap
- Spare O-Ring seal (back door)
- Silicone grease
- Lens cleanning tissue
- 12x anti fog pads
- User manual
Warranty
Meikon provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for 1 year from the date of purchase, with the following exceptions and conditions:
- Should your housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Meikon´s discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from
flooding an O-ring sealed or water tight area will not be covered under
warranty. All O-ring sealed products undergo extensive factory pressure
testing before being shipped and delivered and are therefore guaranteed
to be sealed and functioning when shipped from the factory.
- Meikon/ADITECH will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Meikon/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Meikon does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized Meikon Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and
ADITECH notified of the damage.
- By purchasing this product you agree and understand that in no
event will Meikon/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if Meikon/ADITECH
is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
