Overview & Features
Pressure Leak Detector WFA51
The Weefine pressure leak detector WFA51 is a simple and affordable compact pre-dive vacuum leak detector, simple user installation. Compatible with housings equipped with M16 or M14 accessory port such as Nauticam, Isotta, etc. Just remove the plug of the M16/M14 accessory port from the housing and tighten the vacuum valve to the housing
Key Features
- For only a fraction of the price of other similar systems, you too can now have a the new Weefine WFA51 pre-dive vacuum leak detector that will eliminate guesswork about the housing tightness and let you concentrate on the photography, instead of worrying if today is maybe your turn to experience the underwater photographer's worst nightmare.
- The complete electronic circuit and the battery are located in the robust anodized aluminum one-way valve body for even more convenient operation and ease of installation.
- The green/red LED is visible through the transparent acrylic circular window.
- The included hand vacuum pump is lightweight and requires no batteries, so no nasty surprises when you are far from coast. It achieves required under-pressure in average housing almost effortlessly.
- The installation is simple and straightforward, just screwing the detector into the M16 or M14 accessory port using the required adapter. You can check the water tightness immediately after installation, making the process risk-free.
- The circuit is self-calibrating, and as such suitable for altitude diving.
Available adapters
- WFA51-A for M14 thread and 17 mm length
- WFA51-B for M14 thread and 28 mm length
- WFA51-F for M16 thread and 17 mm length
- WFA51-C for M16 thread and 40 mm length
Technical Specifications
- Diameter: 32mm
- Length: 34mm
- Weight: 27g
- Vacuum valve made of anodized aluminum
- Operates on a user-exchangeable 1632 battery
- Submersible up to 100 meters
What´s Included
- WFA51 vacuum leak detector
- Hand vacuum pump
- 1x 1632 installed button battery
- 2x Spare O-rings
- User´s manual
Warranty
Aditech provides a limited warranty to the original purchaser against
all defects in original workmanship and material under normal SCUBA use
and service as outlined in the owner's manual for
2 years from the date of purchase, with the following exceptions:
- Should your equipment prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from flooding
an O-ring sealed or water tight area will not be covered under warranty.
All O-ring sealed products undergo extensive factory pressure testing
before being shipped and delivered and are therefore guaranteed to be
sealed and functioning when shipped from the factory.
- All batteries and chargers are warranted by the original battery/charger manufacturer.
- Lithium Ion battery packs are warranted for 6 months.
- Aditech will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Aditech does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ADITECH Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree and understand that in no
event will ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
