Overview & Features
Sea Frogs SF-L-A7M4 Housing for Sony A7 IV
Revised ergonomic design, improved safety features and eye-catching exterior. The new Sea Frogs line of aluminum housings is now upgraded with more standard features to ensure better handling and greater protection for your camera.
The new Sea Frogs SF-L-A7M4 underwater housing for Sony Alpha 7 IV is an outstanding example of the next generation of high-end housings for mirrorless cameras. With excellent fit and finish, rugged construction, and meticulous attention to detail, all in a user-friendly sized package, this is a beautifully executed housing. Ergonomic command dials make this housing a joy to use.
The Sea Frogs SF-L-A7M4 housing is manufactured to the highest professional standards of function, style, and durability. It is depth rated to 100m/325 feet and is fully functional with ergonomically designed and labeled controls. With this special design housing, every key of the camera can be pressed to control freely as you want.
Main Features
- The housing is rated to 100m/325ft depth and is rugged and ready for use!
- Anti-corrosion anodized aluminum body, equipped with two sacrificial zinc anodes (one on the front case and the other on the rear) to prevent electrolysis damage.
- Ergonomic design, clear view the camera information and control function.
- Equipped with under guard to protect from scratch.
- Interchangeable lens port system with port lock to prevent it from turning or loosening and the port lock lever is specifically located to avoid being unlocked accidentally.
- The housing provides mechanical controls for all camera functions.
- Each control on the housing is clearly labeled, making it easy to learn the system.
- Large, easy to see buttons allow camera operation underwater, even with diving gloves.
- Easy and secure installation of camera, easy open latch and drop in camera loading make set-up a breeze.
- Right and left handles provide improved ergonomics underwater and are the foundation for your lighting mounts, pre-equipped with lanyard hooks for convenient transportation.
- A top handle grip is included, it allows to lift up and carry the housing in a safe way while travelling or on a boat, it has several threaded holes M5, M6 and NC1/4" that allow the coupling of many accessories for the placement of video lights, strobes, GoPro type cameras, etc.
- It features three 1/4-20 threaded tray mounts located on the center underside of the housing.
- Equipped with the Optical Viewfinder 0.5x as standard.
- The housing features two bulkheads, M16 and M24, for connecting accessories like an external monitor.
- Optional Manual flash trigger (SR-009): For those who do not need TTL photography, the fiber-optic cable connection enables manual firing of the external strobe.
- Port for vacuum test system: A threaded accessory port on top of the housing is the perfect location for the installation of the optional vacuum leak check circuitry and valve. The Vacuum system allows you to pull a vacuum on the housing to simulate pressure at depth and check for leaks prior to entering the water.
- Leak Alarm Unit as standard equipment: The Leak Alarm Unit is included as standard equipment, CR2032 lithium battery included. It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry.
Technical Specifications
- Precision machined from a single aluminum
block.
- Fully anodized and equipped with two sacrificial zinc anodes.
- Accurate ergonomic design and excellent
underwater balance
- Synchro socket: 2 optical sync sockets are built-in.
- Finishing: Anodized coating after barrel sanding.
- Camera installation: Saddle-way.
- Handles: two ergonomic hand grips
- Construction:
- Housing body: Anodized aluminum alloy
- Display window: Abrasion resistant polycarbonate
- Grip handles: Polycarbonate
- Dimensions:
- Width: 330 mm (with handles)
- Height: 169 mm
- Thickness: 137 mm
- Weight: Approx. 2.9 kg (without camera)
- Depth rating: 330 feet/100 meters
What´s Included
- SF-L-A7M4 housing body
- Right & Left handles
- Top handle grip
- Leak detector
- Spare O-Ring seal
- O-ring remover
- Silicone grease
- Lens cleanning tissue
- 12x anti fog pads
- User´s manual
Warranty
Sea Frogs provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for
1 year from the date of purchase, with the following exceptions and conditions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Sea Frogs´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from
flooding an O-ring sealed or water tight area will not be covered under
warranty. All O-ring sealed products undergo extensive factory pressure
testing before being shipped and delivered and are therefore guaranteed
to be sealed and functioning when shipped from the factory.
- Sea Frogs/ADITECH will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Sea Frogs/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Sea Frogs/ADITECH does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized Sea Frogs Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and
ADITECH notified of the damage.
- By purchasing this product you agree and understand that in no
event will Sea Frogs/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
