Overview & Features
ABOUT THIS PRODUCT
The 200DLM/B Underwater Housing is the perfect companion allowing use of the Olympus OM-1 mirrorless micro four-thirds camera in or around the water for scuba, snorkeling, surf, pool, or any adventure.
Pre-dive Checks
There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.
We recommend adding the optional Vacuum Kit with 1/2" Valve # 47012 to pull a vacuum on the housing and check for leaks prior to entering the water.
Construction
Our specially formulated ABS-PC blend housing is highly durable yet
significantly lighter than aluminum. The light color keeps your camera
cooler when shooting in warm, sunny environments.
Lens Support
Ikelite lens ports are the lightest on the market, yet robust and capable of standing up to rough surf.
We
support a wide variety of lenses. Most popular zoom lenses and select
focus rings can be engaged using simple gearing that puts adjustment
right at your fingertips. Zoom and focus gears differ depending on which
lens you are using.
Lens ports and zoom gears sold separately. Refer to the appropriate port chart for compatibility information.
Wi-FI Transfer
Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.
Compatibility
Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories. Differences in lens and control placement prevent other camera models from being used in or adapted to this housing. We are not aware of any other
models which may be used in or adapted to this housing.
Technical Specifications
- 200 ft (60m) depth rating
- DLM Type B port mount
- Two 1/4-20 threaded tray mounts with 3" (76mm) spacing
- Slightly negative buoyancy in fresh water
- Actual buoyancy varies depending on choice of lens and port
- 1315 g
- 190 x 146 x 149 mm
- ABS-PC, acrylic, and acetal construction
- 2 year limited warranty
Controls:
Controls for all camera functions except front dial, multi-selector, one
touch white balance button, Fn lever, preview button, and diopter
adjustment dial
What´s Included
- Housing
- Rear o-ring # 0110 (installed)
- Front o-ring # 0132.36 (installed)
- .050" Hex Key # 0945.11
- 1/16" Hex Key # 0945.16
- Lubricant 1cc tube
Warranty
IKELITE provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for
1 year from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your equipment prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at IKELITE´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- IKELITE nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- IKELITE accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- IKELITE does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized IKELITE Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will IKELITE, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if IKELITE or ADITECH is advised of such damages.