Scubalamp P33

Manufacturer: Scubalamp

Availability: in stock

Scubalamp P33, amazing new video & focus light with white, red, pink and blue (ultraviolet) lights. The P33 is equipped with one 20mm COB LED emitting a staggering 5000 lumen in video mode and 10000 lumen in strobe mode. Featuring 9 output levels, the P33 can dim from 100% to 10% to fine-tune exposure and extend battery life.

Options

Overview & Features
Technical Specifications
What´s Included
Compatible products
Warranty

Overview & Features

Scubalamp P33

We have built in our patented mechanical push button switch to turn the light on-off, and cycle through the modes.

Using a single battery lithium pack creates a very compact light weight package. Also includes standard 25mm ball mount to attach to your arm system. This can be replaced with an optional YS mount or handle.

Awesome light for video, macro, UV photography and underwater photography in general!

Key Features

5000 lumen in video mode
10000 lumen @ 1/2000 sec in strobe mode
100 degree beam LED light
Dimming from 100% to 10% in 9 steps
Long Burn Time, 30/270 min
Flicker-free firmware design
LED low battery alarm, Green (> 70%), Yellow (<70%), Red (<30%)
Integrated Battery and Lighting Head
Superior water penetration and colour contrast
Excellent Colour Rendition
>50,000 hours average LED lifetime
Patented mechanical push button switch
Removable battery pack for safe travel.
Depth rated to 100 m (330 feet)
Double O-Ring Sealed
Wide range of mounting options

Product Details

The P33 is designed to be used as primary video lighting for any underwater video, action camera, digital still or digital SLR system.
A perfectly diffused 100 degree beam underwater provides even coverage from macro to wide angle.
Near daylight 5600º Kelvin colour temperature ensures the most true, natural tones especially when combined with ambient light in seascapes.
The light head's powerful 5000 lumen beam may be reduced from 100% in 9 steps to 10% of the power to fine-tune exposure and extend battery life.
To control the power of the video light, the P33 has two buttons that allow the luminous flux to be increased or decreased in 9 steps.
A 7-segment digital display shows the selected power level.
The switches are mechanical push-button type with locking circuit to prevent accidental switching on.
In strobe mode the P53 emits 10000 lumen @ 1/2000 sec
Supplied with fiber optic cable that allows synchronization with the camera strobe
The red light mode allows for night diving to approach the subjects to be filmed or photographed without frightening them.
The UV light mode allows fluorescence phenomena to be shown.
The heavy-duty and reliable mechanical switches are within easy reach and features click-stops to indicate power setting by feel.
Equipped with LED low battery alarm that changes colour (green, yellow, and red) depending on battery capacity
The P33 has been designed and manufactured using high quality components to withstand harsh environments.
The P33 is equipped with a 25mm ball mount, the 1" (2.5cm) ball arm system is compatible with arm systems from several manufacturers.
Additional battery packs may be purchased separately to quickly exchange for a fully charged pack and keep shooting.

Technical Specifications

PERFORMANCE

Light Source: 1x 20mm COB LED, 6x CREE XPE R2 (red), 6x Bleu (UV)
Light Colors: white, red, pink, blue (UV)
Synchronized strobe mode: yes, with optical cable supplied
Luminous Flux (Lumen):

White LED: 5000 lm
White LED (strobe mode): 10000 lumen @ 1/2000 sec
Red/Pink LEDs: 1000 lm

Beam angle: 100º
Colour temperature: 5600º Kelvin
Colour rendering index (CRI): 96
Television Lighting Consistency Index (TLC): 97

ELECTRICAL

Dimming 9 steps (white light) : 100 to 20%
Dimming 5 steps (red/pink light) : 100-75-50-25%
Dimming 5 steps (UV) : 100-75-50-25%
Switch: Patented mechanical push button
Battery capacity indicator LED: green (> 70%), yellow (<70%), red (<30%)
Powered by: 3x 18650 Li-ion rechargeable battery pack, 4.2 V, 37.7 Wh
Burn time:

@ 100%: 30 min
@ 10%: 270 min

Cycle life at 23ºC: after 800 cycles +/- 70% available capacity
Charging time: 2-3 h

MECHANICAL

Depth rating: 100m/330 feet
Pressure Testing: seal integrity and operation validated
Body Material: Aluminum head, and body
Treatment: Hard-anodizing type III
Output Window: 4mm clear PC
Arm bracket: supplied with 25mm ball mount
Dimensions:

Diameter: ø 56/46 mm
Length: 137 mm

Weight: 522g (land) / 320g (water)

What´s Included

Video light P33
Li-ion rechargeable battery 3x18650, 12.6 V, 37.7 Wh
Optical sync cord
Light adapter with 25mm ball mount
Spare O-rings
Battery charger
Carry case
User´s manual

Warranty

Scubalamp provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 15 months from the date of purchase, with the following exceptions:

Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Advanced Diving Technologies´ discretion, free of charge, excluding shipping and handling charges.
Repairs made under this warranty will not extend the warranty period
This warranty is non-transferable and applies to the original purchaser only.
All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
All batteries and chargers are warranted by the original battery/charger manufacturer.
Lithium Ion battery packs are warranted for 6 months.
Aditech will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
Scubalamp/ADITECH accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
Aditech does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
This warranty specifically excludes bulbs, lenses, cords, wet connectors, O-rings, fuses or other conditions resulting from misuse and negligence.
This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
Modifications or repair by anyone other than an authorized Scubalamp Dealer or Scubalamp Service Department will void the warranty.
By purchasing this product you agree and understand that in no event will Scubalamp/ADITECH, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Scubalamp/ADITECH is advised of such damages.